Trade only — supplying builders & trade contractors for 25+ years

Shower Screens

Frameless vs Semi-Frameless vs Framed Shower Screens: A Builder’s Guide

Guide
Shower Screens
Read time
5 min
Written for
Builders & site teams
Published
12 September 2026

Framed, semi-frameless or frameless? What each shower screen type asks of your walls, budget and program, and where each one fits on a build.

Every bathroom on a job ends with the same question: what kind of shower screen goes in? On a volume build the answer is often locked in by the contract spec. On a custom home or a high-end reno, the client usually has a picture in mind and it is up to you to make it work on site. Either way, knowing the real differences between framed, semi-frameless and frameless screens saves you rework, variations and awkward conversations at handover.

The three types at a glance

The names describe how much aluminium is holding the glass. The less frame there is, the more the glass itself has to do the structural work, so thickness and fixing method change as you move up the range.

FramedSemi-framelessFrameless
Typical glass thicknessThinner panels, commonly around 4 to 6mmCommonly around 6 to 8mmCommonly 10mm (some designs use 12mm)
How the glass is heldAluminium frame on all edgesFrame on some edges, usually wall channels and baseHinges, clamps, channels and support bars fixed direct to the glass
Tolerance for out-of-plumb wallsMost forgivingModerateLeast forgiving
Relative costLowestMid-rangeHighest
Premier SW guarantee5 years5 yearsLifetime (10mm frameless)

Glass thicknesses above are typical industry ranges, not fixed rules. The right thickness for a given panel depends on its size, how it is supported and what AS 1288 requires, so confirm the detail for each design at quote stage and check project requirements with your certifier.

Framed shower screens

A fully framed screen has aluminium around every panel. The frame carries the glass, which is why the panels can be thinner and lighter. Sliding doors and pivot doors are both common.

Where they suit

  • Volume and project homes where the budget per bathroom is tight
  • Investment properties and rentals
  • Older homes where the walls are rarely plumb

Builder’s notes

The frame gives you room to take up small variations in walls and floor, and the lighter panels are easier to handle on site. The trade-off is more frame, seals and runners to clean and maintain.

Semi-frameless shower screens

Semi-frameless screens keep aluminium where it is doing useful work, typically the wall channels and sometimes the base or top, and leave the door and exposed edges without a frame. The result looks lighter than a framed screen without the cost and site demands of fully frameless.

Where they suit

  • Mid-range spec homes and townhouse or unit developments
  • Renovations where the client wants an upgrade from framed without a big jump in price
  • Bathrooms where the walls are close to plumb but not perfect

Builder’s notes

Wall channels hide a fair amount of sin, so semi-frameless is a practical middle ground when you cannot guarantee a perfectly square recess. Our semi-frameless range carries a 5-year guarantee, the same as our full-frame screens.

Frameless shower screens

Frameless screens use thick toughened glass, usually 10mm, held with hinges, clamps, low-profile channels and a support bar where the design needs one. There is very little metal on show, which is what owners pay for.

Where they suit

  • Premium custom homes and high-end renovations
  • Display homes and show units where the bathroom has to sell the build
  • Walk-in and hobless showers with linear drains, where a clean line from floor to ceiling is the whole point

Builder’s notes

Frameless is where site preparation matters most. With no frame to hide gaps, out-of-plumb walls or a floor that is out of level show up as uneven gaps along the glass edge or a door that does not sit right. Hinges and clamps need solid fixing behind the tiles, so noggings or suitable backing should be planned before the sheeting goes up, not discovered after.

Our 10mm frameless screens come with a lifetime guarantee, which is worth mentioning to clients who are weighing up the extra outlay.

Cost and labour trade-offs

We will not quote prices here because every screen we make is custom designed and made to order, and the numbers depend on sizes, glass, hardware and finish. In general terms, though, the cost order is framed, then semi-frameless, then frameless, and the gap is driven by more than just the glass.

  • Glass: thicker panels cost more to make and handle.
  • Hardware: frameless relies on quality hinges and clamps doing structural work, and finishes like brushed or matte black add to the cost.
  • Site preparation: frameless needs flatter, plumber walls and planned backing, which can mean more time from your tiler and framer.
  • Risk of rework: an out-of-tolerance recess is far easier to absorb with a framed or semi-frameless screen.

Out-of-plumb walls and tolerances

Most screen headaches start before the glass is ordered. A few things worth checking before the final measure:

  • Check both returns of the shower recess with a long level. Walls that lean in or out change the panel sizes.
  • Check the floor where the screen will sit, especially on hobless showers where the falls run to a linear drain.
  • Make sure tiling is finished, including any trims or feature tiles, since the screen is sized to the finished surface.
  • Confirm where the backing is for hinge and clamp fixings on frameless designs.

If you know a wall is out, tell your supplier before the measure.

Maintenance and handover

Owners ask about cleaning more than anything else. Framed screens have more tracks and seals to keep clean. Semi-frameless reduces that. Frameless has the least to clean around, but water marks show more on large clear panels, so a squeegee habit helps. Across all three, advise owners to use mild, non-abrasive cleaners and avoid scouring pads on glass and metal finishes, and to check seals and silicone periodically.

Include the guarantee details in your handover pack. For our screens that is 5 years on full-frame and semi-frameless, and a lifetime guarantee on 10mm frameless.

Choosing for your next project

As a rough rule: framed for tight budgets and tricky walls, semi-frameless for the best balance of look and cost across multiple units, and frameless when the bathroom is a selling point and the site preparation can support it. Premier Showerscreens & Wardrobes is a family-run, trade-only manufacturer with more than 25 years in the business, and every screen is custom designed and made to order using Australian-standard glass and aluminium products. You can see the range on our shower screens page.

If you are pricing a job, send us your plans and selections for a trade quote. Builders and trades working with us regularly can also set up a trade account. Our office is open Monday to Friday, 8:30am to 5pm, on (02) 9625 6211.

FAQs

Is frameless glass always 10mm thick?

10mm is the most common thickness for frameless screens, and some designs use 12mm. The right thickness depends on panel size, how it is supported and the applicable standard, so confirm it for each design.

Which shower screen type is best for out-of-plumb walls?

Framed screens are the most forgiving, followed by semi-frameless with wall channels. Frameless needs the most accurate walls and floor, so flag any known issues before the measure.

What guarantee do Premier SW shower screens carry?

Our full-frame and semi-frameless screens carry a 5-year guarantee, and our 10mm frameless screens carry a lifetime guarantee.

Do you sell shower screens direct to homeowners?

No. Premier Showerscreens & Wardrobes is a trade-only business supplying builders, developers, renovators and trade contractors.

Trade enquiries

Send us your plans. We'll come back with a clear, itemised quote.

Shower screens, built-in wardrobes and mirrors from one supplier, made to order for your job. Upload plans or a schedule and tell us your timing.

Request a trade quote (02) 9625 6211

Mon–Fri 8:30am – 5:00pm